E11 says the oven touch keys are not working properly. Bosch names moisture on the keypad as a possible reason; wipe it dry and cycle the power.
Model compatibility: Bosch reuses codes across series and model years, so E11 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The touch keys are not operating properly, possibly because of condensation on the keypad.
What E11 tells you
On its owner-support page for ovens, Bosch describes E11 as touch keys that are not operating properly, and offers a probable reason: condensation on the keypad. That makes it an unusual oven code, because the page expects the owner to try something.
Moisture and touch panels
There are no moving buttons here. The keys sense your finger through the surface of the panel, so a thin film of water spread over it can throw them off. With condensation named as a possibility, rule it out before concluding the keypad itself is broken.
The two Bosch steps
Dry the panel. Use a dry cloth and go over the full key area rather than only the key that failed.
Interrupt the power for 10 seconds. Turn the oven’s fuse or breaker off at your electrical panel, count to ten, and turn it back on.
Afterward test the keys. If the display requests it, set the clock before anything else.
When the code stays
Bosch’s general advice for an E code that keeps coming back is to write it down, switch the oven off at the fuse box, and arrange a service visit. Pressing any key will silence the beeping that sometimes accompanies an error. Heat is not a drying method here, and the panel should not be opened, because the keypad electronics are behind it.
Quick answers
Can I carry on cooking? Yes, provided the keys respond normally after the wipe and the power reset. If they still act up, leave the oven off until it has been looked at.
Are E11 and E011 identical? Going by Bosch’s own words they are not. E011 is from the 2007 wall oven service manual and means a key is read as held down continuously, whereas E11 comes from the owner-support page and means touch keys misbehaving. A dry wipe is a sensible first move for both.
Still seeing E11 after a dry wipe and a power reset? Phone (310) 879-1577 for Bosch oven help in Los Angeles. Give us the model number and say that both Bosch steps are done; see also the oven repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bosch appliance?
Book a specialist visit for a clear estimate and approval before any repair.
